What Certifications Should A Sheet Mask Factory Have
Nov 19, 2026
The most common example: a buyer receives an ISO 22716 certificate and concludes the product is "compliant". ISO 22716 certifies that the factory's production management system has passed an audit. It does not certify that this particular mask has a stable formula, acceptable microbiological results, or a label that can go on shelf. Conversely, a COA certifies that one batch met the agreed specification; it does not certify that the factory has a system. Neither substitutes for the other.
Senwell recommends splitting the question into three sentences: which system certificates the factory holds, which test reports exist for this SKU, and which market-access files your destination requires and who is responsible for each. Three sentences, three layers - and the answers stop getting mixed together.
Layer one: system certificates, which certify the factory
This layer answers a single question - whether the factory can manufacture consistently. It has nothing to do with any one mask.
|
Certificate |
What it certifies |
Whose name is on it |
Common misunderstanding |
|
ISO 22716 / GMPC |
The cosmetics good-manufacturing-practice system has passed audit |
The actual production facility |
Assuming it means the product is compliant |
|
China Cosmetic Production Licence |
The entity is licensed to manufacture cosmetics in China, within a stated production scope |
The production entity |
Assuming the licence covers every category, when the scope may not |
|
ISO 13485 |
Medical-device quality management system |
Depends on the certified scope |
Not normally required for a cosmetic sheet mask; must not be claimed before it is confirmed |
|
ISO 9001 |
General quality management system |
The company |
Not the same as cosmetics GMP |
Two points in this layer need to be settled early.
First, the name on the certificate is the factory, not necessarily the company you are contracting with. When a supplier is a trading company or an OEM partner, production and the certificate both sit with the partner facility, so the certificate holder and the contracting party are two different names. That is normal in this industry - the problem is not the different name, it is nobody telling you in advance. Senwell's practice is to provide the certificate together with the facility name and address at quotation stage, so you can check the documents against the actual production site yourself.
Second, read the scope, not just the existence. "Holds ISO 22716" and "the ISO 22716 scope covers mask filling and packing" are two different statements. The same applies to the production licence: the scope stated on it has to cover the category you intend to make.
Layer two: batch and product documents, which certify this product
This layer answers whether the goods shipped to you are conforming. It follows the SKU and the formula version, and it cannot be carried across products.
|
Document |
What it covers |
What it does not replace |
|
COA (certificate of analysis) |
Issued per batch, covering the agreed specification items |
Not a third-party safety or efficacy report |
|
MSDS / SDS |
Safety information for the raw material or finished product |
Not a market authorisation |
|
Full INCI |
Ingredient declaration for labelling and filing |
Does not include the quantitative formula; percentages usually follow an NDA or sample confirmation |
|
Stability report |
Shelf-life and formula-stability basis |
Cannot be applied across a different formula or pack |
|
Microbiological report |
Microbiological limits met |
Not a preservative challenge test, and not a human safety assessment |
|
Heavy metals / Prop 65 testing |
Compliance with specific limits |
Requires separate laboratory submission and separate cost |
The most frequent confusion in this layer is COA versus third-party report. A COA is the factory's own batch certificate against the agreed specification items; a third-party report is an external laboratory's conclusion. A COA does not automatically include heavy metals, skin irritation or efficacy data. If you need those, they have to be arranged, costed and reported separately.
Senwell recommends putting the test items you need into the specification sheet, not into an email. An email is a request; a specification sheet is an obligation.
Layer three: market-access files, where the factory is often not responsible
This layer answers whether the goods can be sold in the destination market. Its defining feature is that some of these files can only be completed by the brand or its local entity. The factory cannot do them, and should not promise to.
|
File |
Market |
Who can issue it |
Responsible party |
|
CPSR / PIF |
EU / UK |
Must be signed by a qualified safety assessor |
The brand's responsible person |
|
CPNP notification |
EU |
Submitted by the EU responsible person |
The brand; we do not submit on your behalf |
|
FDA facility registration |
US |
Depending on product and facility |
Factory supports; registration is not product approval |
|
MoCRA compliance |
US |
We provide supporting documents |
Responsible person and adverse-event obligations sit with the brand |
|
EAEU declaration (TR CU 009/2011) |
Russia / EAEU |
Applicant must be an entity established in the EAEU |
The importer or local legal entity |
|
Halal |
Middle East / Pakistan / SEA |
Requires a finished-product Halal certificate |
The brand applies; the factory supports |
|
Ordinary cosmetics filing / special cosmetics registration |
China (domestic sale) |
Domestic responsible entity |
The brand; claims such as whitening or spot correction require separate registration |
The sentence worth remembering from this table is that the factory provides manufacturing-side documents, not market authorisation. Keeping those two apart saves a great deal of mutual blame later.
Certificates you cannot get, because they do not apply
This is the section buyers should raise at enquiry stage, because an eager "yes" here is a warning sign rather than a reassurance.
|
What buyers ask |
The reality |
What to ask instead |
|
Are you FDA approved? |
There is no "FDA certification" for cosmetics. Facility registration is not product approval |
Is FDA facility registration applicable, and which documents can you provide? |
|
Is the mask CE marked? |
CE does not apply to ordinary cosmetics; it applies to medical-device classification |
How is this product classified, and what claims will it carry? |
|
Is the hydrocolloid medical grade? |
"Medical grade" requires a certification and a device classification |
What is the material specification and absorption capacity? |
|
Are you Halal certified? |
A finished-product certificate is required; gelatin-free and porcine-free are not Halal |
Do you hold a finished-product Halal certificate? |
|
Do you have ISO 13485? |
A medical-device system; not normally needed for a cosmetic sheet mask |
What is the certified scope, and does it cover this category? |
|
Can you guarantee 100% identical to the sample? |
Cosmetic production has a normal process tolerance |
Where is the tolerance written down? |
The point of this layer is simple: a responsible supplier tells you which certificates do not apply, rather than answering yes to everything. A supplier who answers yes to all of them is either not technical or is betting you will not check.
Once you have a certificate, how to verify it
Certificates are not scarce. Verifiable certificates are what matter. Five checks, about five minutes.
|
What to check |
How to check it |
Common problem |
|
Holder name and production address |
Put the company name and address on the certificate beside the actual production site |
Holder is a trading company, production is elsewhere, and nothing explains the gap |
|
Certified scope |
Read the scope wording: does it cover your category and process? |
Scope covers creams only, but is used to vouch for masks |
|
Validity |
Check the expiry date and the original issue date |
Expired certificate, or a three-month-old certificate behind a "decades of experience" claim |
|
Issuing body |
Check the body's status and accreditation (for example CNAS or IAF recognition) |
Unknown body that cannot be looked up |
|
Certificate number |
Verify the number with the issuing body or a public register |
Number cannot be found, or does not match the document |
Senwell's approach is to send the certificate together with the facility information rather than a standalone image. The reason is practical: a buyer will verify eventually, and it is better to hand over something verifiable at the start than to explain it after being questioned.
What Senwell can and cannot provide
This section is written to our actual scope, without decoration.
We can provide: ISO 22716 and GMPC certificates, with the facility name and address supplied alongside them; full INCI at evaluation stage, with the quantitative formula following an NDA or sample confirmation; COA per batch; MSDS / SDS; stability and microbiological reports, matched to the specific SKU and formula version; supporting documents for FDA facility registration where applicable; the manufacturing-side formula and test data needed for a CPSR or PIF; the manufacturing-side documents needed for an EAEU declaration; and label artwork input.
We cannot provide, and should not promise: signing a CPSR or PIF on your behalf; submitting the CPNP notification, or carrying the EU responsible person's legal liability; applying for an EAEU declaration on your behalf; applying for a Halal certificate on your behalf; issuing CE; or producing efficacy or safety conclusions that have not been tested.
One boundary is worth stating plainly. Senwell is a manufacturer-backed OEM and ODM partner. The formulation is developed and owned by our team, production runs at our qualified partner manufacturing facility in Guangdong, and sampling, production follow-up and documentation are managed by our own project, research and quality teams. So the certificate carries the facility's name, and the document package we hand you is complete. Both of those things are true at the same time.
FAQ
What certifications should a sheet mask factory have as a minimum?
At system level, ISO 22716 / GMPC; at product level, COA, MSDS, full INCI, and stability and microbiological reports; at market level, CPSR / PIF / CPNP, FDA facility registration, an EAEU declaration or a Halal certificate depending on the destination.
Does ISO 22716 prove the product is compliant?
No. It certifies that the factory's production management system has passed audit. It says nothing about a specific product's formula stability, microbiological results or label compliance.
If the factory has ISO 22716, do we still need product testing?
Yes. System audit and product testing are two different tracks: the system shows the factory can manufacture consistently, the testing shows this batch met the agreed specification.
What does a sheet mask need for the EU market?
A CPSR and PIF signed by a qualified safety assessor, and a CPNP notification submitted by the EU responsible person. The factory supplies the formula, INCI, MSDS, COA, stability and microbiological reports, and label artwork input.
Is "FDA approved" a correct term?
No. There is no FDA approval for cosmetics, and facility registration is not product approval. What can be confirmed is whether facility registration applies and which supporting documents are available.
Why is the certificate holder different from the company we contract with?
When a supplier is an OEM partner and production runs at a partner facility, the certificate is in the facility's name. That is a normal model, but it should be explained in writing so the buyer can verify the documents.
Does an ordinary cosmetic sheet mask need CE marking?
No. CE applies to products classified as medical devices; an ordinary cosmetic sheet mask is not one.
Can we say porcine-free or gelatin-free without a Halal certificate?
You can state the formulation fact, but that is not a Halal claim. A Halal claim requires a finished-product certificate.






