Tips for making your own crystal collagen facial mask

Tips for making your own crystal collagen facial mask

The pursuit of trend is a trend, DIY（Do a skin care facial msk for yourself） mask is also very liked by beauty girls , then today SENWELLCARE for you to introduce a new mask production method(maybe you can need a auto machine for fial mask maker)-DIY crystal collage mask, in fact, it is very simple, but also easy to make.

1, first prepared a cup of boiled water, the amount does not need a lot, I do with a disposable paper cup, the amount is: pour the water into the cup, the water and the location of the about 2.3 cup mouth, which is enough.

2, also note when the capsule to the cup, I tried directly down, so bad, it is easy to pour into pieces, because you can't stir in time, I now teach you a stupid method, but very useful, is to remove the capsule on a clean paper, and then break the powder slightly (because sometimes pour out or a capsule shape), after stirring your boiling water, while slowly pour the powder into the water, this time must slowly pour, not fast, so that the powder will be very evenly dissolved into the water.

3, keeps stirring clockwise or counterclockwise (in the same direction anyway), maintaining it for about 5 minutes. This program must not be lazy, and success or failure is very important! )

4, when the water should be sticky silk, Now you can fall into the mold, Be attention when you fall, To pour in from the position of the nose, After the water is poured in, let the water is evenly filled with the mold, Hold the mold chin and cheek position of the face, This was to concentrate the water on the nose and forehead (as the bearing was in both positions, So the thick points must be made, So the mask doesn't fall out), Thin cheeks and chin (generally thick nose and forehead, Thin cheeks and chin) Just set it for a minute or so, Then the water began to condense, When the surface of the water can not move, you can never hold it, Just put it in the fan or cool place, Leave it in for about 10 minutes or so, Then you can go for a face or take a shower first, Make the most of the time, oh, Hehe!

5, is finally time to apply the mask, This is very skilled, too, By this time the masks were all molded, But be careful not to dig it out directly, Otherwise it is easily break, We had better lie down first, The mold then takes a 90-degree angle to the face (i. e., the chin position is attached, Face is at a 90-degree angle with the mold), Then dig the edges of the mask with your fingernails, That whole mask will fall on the face, Then you move the mask slowly with your fingers, Move it to the right position, This surely certainly not broken, I tried the lark, oh, After waiting for over 10 minutes, After the facial mask and the face are fully affixed, You can do without lying down, You can see the TV, and something, But it is best to lie down,and enjoy it.